Analysis of methods for estimating the effectiveness of drag bit
A.R. Yakhin.
In article questions of methods for estimating the effectiveness of drag bit cutting structure to improve its design based on the analysis of bench model characteristics of the designed bit are considered.
References:
cutting structure; drag bit; experimental assembly; methods; PDC cutter; вооружение долота; долото режуще-скалывающего действия; методика оценки вооружения; экспериментальная установка References to this article (GOST) A.R. Yakhin. Analysis of methods for estimating the effectiveness of drag bit // Electronic scientific journal "Oil and Gas Business". 2011. №6. P.68-75. URL: http://ogbus.ru/authors/Yakhin/Yakhin_1.pdf
- Besson A., Berr B., Dillard S., Drake E., Ivie B., Ivie C., Smith R., Watson G. Novyi vzglyad na rezhushchie elementy burovykh dolot, Neftegazovoe obozrenie - Oilfield Review in Russian, Spring 2002, Volume 7, Issue 2, pp. 4 - 31. http://www.slb.com/~/media/Files/resources/oilfield_review/russia02/spr02/p4_31.ashx (transl. from: Besson A., Berr B., Dillard S., Drake E., Ivie B., Ivie C., Smith R., Watson G. On the Cutting Edge, Oilfield Review, Autumn 2000, Volume 12, Issue 3, pp. 36 - 57. http://www.slb.com/~/media/Files/resources/oilfield_review/ors00/aut00/p36_57.ashx)
- Issledovanie i razrabotka effektivnykh protsessov razrusheniya gornykh porod pri burenii. Promezhutochnyi otchet VNIIBT (Research and development of efficient processes for the rock breaking during drilling. Interim report of VNIIBT). Moscow, 1978, 178 p.
- Trushkin O.B. Analiz silovykh i energeticheskikh parametrov raboty porodorazrushayushchikh instrumentov na baze razrabotannogo avtonomnogo tsifrovogo izmeritel'nogo ustroistva (The power and energy parameters analysis of rock cutting tools on the basis of developed an autonomous digital measuring device). PhD Thesis. Ufa, 2006. 204 p.
- Trushkin O.B. Pokazateli i parametry raboty dolot pri stendovom burenii (Indicators and parameters of the bits at the drilling bench), Electronic scientific journal “Neftegazovoe delo - Oil and Gas Business”, 2006, Volume 1, 17 p.
- Spivak A.I., Popov A.N. Razrushenie gornykh porod pri burenii skvazhin (Destruction of rocks during drilling). Moscow, Nedra, 1994. 261 p.
- Issledovanie protsessov razrusheniya gornykh porod pri burenii. Promezhutochnyi otchet VNIIBT (Research of rock breakage processes during drilling. Interim report of VNIIBT). Moscow, 1974. 328 p.
- US Patent 4098362. Е21В 9/36. Rotary drill bit and method for making same. Bonnice Phillip. Published on 04.07.1978.
- Zeuch D.H., Finger J.T. Rock Breakage Mechanisms With a PDC Cutter. SPE Annual Technical Conference and Exhibition, 22-26 September 1985, Las Vegas, Nevada.
- Glowka, D.A. Development of a Method for Predicting the Performance and Wear of PDC Drill Bits, Sandia Report No. SAND86-1745, June 1987.
- Rafatian N., Miska S., Ledgerwood L.W., Ahmed R., Yu M., Takach N. Experimental Study of MSE of a Single PDC Cutter Interacting With Rock Under Simulated Pressurized Conditions, SPE Drilling & Completion, 2010, Volume 25, Issue 1, pp. 10 - 18. SPE-119302-PA. doi: 10.2118/119302-PA.
- Abdullin M.M. Razrabotka novogo vooruzheniya dlya dolota tipa S na baze eksperimental'nogo izucheniya ego vzaimodeistviya s zaboem pri burenii (The development new cutting structure for the bit type C on the basis of the experimental study of its interaction with the bottomhole during the drilling). PhD Thesis. Ufa, 1985. 184 p.
- Mavlyutov M.R. Razrushenie gornykh porod pri burenii skvazhin (Rock fracture in hole drilling). Moscow, Nedra, 1978. 215 p.
- Simonyants L.E. Razrushenie gornykh porod i ratsional'naya kharakteristika dvigatelei dlya bureniya (Rocks destruction and drilling motor optimum characteristics). Moscow, Nedra, 1966. 228 p.
- Griguletskii V.G. Optimalnoe upravlenie pri burenii skvazhin (Well-drilling optimal control). Moscow, Nedra,1988. 229 p.
- Artsimovich G.V. Mekhano - fizicheskie osnovy sozdaniya porodorazrushayushchego burovogo instrumenta (Mechanical and physical basis of creating a rock-cutting drilling tool). Novosibrsk, Nauka, 1985. 129 p.
- Vovchanovskii I.F. Porodorazrushayushchii instrument na osnove «Slavuticha» dlya bureniya glubokikh skvazhin (Rock cutting tools based on the "Slavutych" for the deep wells drilling). Kiev, Naukova dumka, 1979. 66 p.
cutting structure; drag bit; experimental assembly; methods; PDC cutter; вооружение долота; долото режуще-скалывающего действия; методика оценки вооружения; экспериментальная установка References to this article (GOST) A.R. Yakhin. Analysis of methods for estimating the effectiveness of drag bit // Electronic scientific journal "Oil and Gas Business". 2011. №6. P.68-75. URL: http://ogbus.ru/authors/Yakhin/Yakhin_1.pdf