The paper presents the results of years of work carried out by a team of authors led by professor UGNTU Lyagov A.V. The article presents the technology to create a secondary opening of productive zones of the reservoir by drilling ultra-deep channels of small diameter and curvature radius of the projected trajectory. The studies were conducted on the technical task of “Gazprom dobycha Orenburg”, as a result of which, performed experiments with different layouts on a special stand of the laboratory, can be analytically established qua-litative and quantitative laws of behavior of perfobur in excess of long channel, and field tests conducted for experimental assemblies in two wells workovers.
Kotyakhov F.I. Osnovy fiziki neftyanogo plasta (Fundamentals of the oil reservoir physics). Moscow, Gostoptekhizdat, 1956. 364 p.
Berdin T.G. Proektirovanie razrabotki neftegazovykh mestorozhdenii sistemami gorizontal'nykh skvazhin (Design of oil and gas field development by using systems of horizontal wells). Moscow, Moscow, Nedra-Biznestsentr, 2001. 199 p.
Bliznyukov V.Yu., Povalikhin A.S. Tekhnologicheskie skhemy bureniya sistem gorizontal'nykh stvolov v plaste vysokovyazkoi nefti (Technological schemes of horizontal holes drilling in high-viscous oil deposit), Stroitel'stvo neftyanykh i gazovykh skvazhin na sushe i na more, 2011, Issue 10, pp.10-14.
Patent 2213195 RU. IPC Е21В 7/06. Method of tapping of oil and gas well producing formations / N.A. Shamov. Appl. 23.10.2002. Publ. 27.09.2003.
Shamov N.A., Lyagov A.V., Zinatullina E.Ya., Aseev E.G., Bubelov A.V., Tekhnologiya i tekhnicheskie sredstva uluchsheniya gidrodinamicheskoi svyazi skvazhiny s plastom (Technologies and technical equipments course to the improvement of hydrodynamical contact well and formation), Neftegazovoe delo - Oil and Gas Business, 2006, Vol. 4, Issue 1, pp. 47 - 57. URL: http://ngdelo.ru/article/view/1505
Gusman M.T., Baldenko D.F., Kochnev A.M., Nikomarov S.S. Zaboinye vintovye dvigateli dlya bureniya skvazhin (Downhole screw motors for well drilling). Moscow, Nedra, 1984. 232 с.
RD 153-39.0-421-05. Metodicheskoe rukovodstvo po geologo-tekhnologicheskomu obosnovaniyu bureniya gorizontal'nykh mnogozaboinykh skvazhin i bokovykh gorizontal'nykh stvolov. (Instructional guidelines for geological and technological justification of horizontal multilateral wells and horizontal holes drilling). Bugul'ma, TatNIPIneft, 2005. 59 p.
Lyagov A.V., Ishemguzhin E.I., Sultanov B.Z. O povyshenii nadezhnosti shpindelya turbobura (On increasing the reliability of the turbo-drill spindle), Mashiny i neftyanoe oborudovanie, 1977, Issue12, pp.7-8.