Tag Archives: скорость бурения
In last the years, before beginning of drilling operation in 17.5 inch holes in Marun field, great amount of water is saved in earthen reserve pit to increase rate of drilling after running 18 5/8 casing to the depth of 100 meters and cementation, using a packed hole assembly, saved water in earthen reserve pits is directly pumped to hole with high velocity as a drilling fluid. Also by applying high weight on bit (WOB) and revolutions per minute (RPM), rate of penetration will be increased considerably. In these conditions, circulating system cannot refine drilling fluid because of large amount of cutting. Thus drilling mud is conducted to the earthen reserve pit to allow solid materials to settle there, and then free water is pumped to well again. High drilling rate observed by this method (1000 m/day). In this paper, evaluation of drilling problems from the beginning to the end of 17.5 inch hole is considered. These problems are: leaning situation, crushing, stock pipe, hole deviation and cementation.